Boeler tiwb syth aloi Titaniwm Gradd 12
Oct 21, 2025
Gall GNEE ddarparu'r ffurflen
Mathau o Diwbiau Di-dor a Weldiedig Titaniwm Gradd 12
|
Boeler tiwb syth aloi Titaniwm Gradd 12 |
Tiwb ffwrnais Titaniwm Gradd 12 |
| Tiwbiau Di-dor Aloi Titaniwm Gradd 12 | Tiwb Rownd Aloi Titaniwm Gradd 12 |
| Tiwbiau Eliptig ac Hirgrwn Gradd 12 Titaniwm | Tiwb petryal Titaniwm Gradd 12 |
| Tiwb Gweld Titaniwm Gradd 12 | Titaniwm Gradd 12 Tiwbiau Pwyleg |
| Titaniwm Gradd 12 Tiwbiau Awyrofod | Titaniwm Gradd 12 Tiwb Pwysedd Uchel |
| Tiwbiau Coiled Aloi Titaniwm Gradd 12 | Tiwbiau Capilari Titaniwm Gradd 12 |
| Tiwbiau cyddwysydd Titaniwm Gradd 12 | Tiwbiau injan Aero Titaniwm Gradd 12 |
| Tiwbiau Weldiedig Aloi Titaniwm Gradd 12 | Tiwbiau Di-dor Aloi Titaniwm Gradd 12 |
Pibell Titaniwm Gr 12,Tiwb a thiwbiauGraddau Cyfwerth
| SAFON | WERKSTOFF NR. | UNS |
|---|---|---|
| Titaniwm Gr12 | 3.7165 | N56400 |
Pibell Titaniwm Gr 12,Tiwb a thiwbiauCyfansoddiad Cemegol
| Gradd | Ti | C | Fe | H | N | O | Al | V |
|---|---|---|---|---|---|---|---|---|
| Ti Gradd12 | 90 mun | - | 0.25 uchafswm | - | - | 0.2 uchafswm | 6 mun | 4 mun |
Titaniwm Gr 12pibell,Tiwb a thiwbiauPriodweddau Mecanyddol a Ffisegol
| Gradd | Dwysedd | Ymdoddbwynt | Cryfder Tynnol | Cryfder Cynnyrch (Gwrthbwyso 0.2%) | Elongation |
|---|---|---|---|---|---|
| Ti Gr 12 | 4.43 g/cm3 | 1632 gradd (2970 gradd F) | Psi – 138000, MPa – 950 | Psi – 128000, MPa – 880 | 14 % |
| Enw Cyffredin | |
|---|---|
| Titaniwm Gradd 12 | |
| Ti{0}}CODE 12™ | |
| Ti-0.3Mo-0.8Ni | |
| UNS | |
| R53400 |
Titaniwm Gradd 12 Maint Tiwb
| Wal | Meintiau (OD) |
|---|---|
| .010 | 1/16" , 1/8" , 3/16" |
| .020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
| .012 | 1/8" |
| .016 | 1/8" , 3/16" |
| .028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
| .035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
| .065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
| .083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
| .095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
| .109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
| .120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
| .125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
| .134 | 1" |
| .250 | 3" |
| .375 | 3 1/2" |
Stoc Tiwb Titaniwm Gradd 12
| Pris Tiwbio Gradd 12 Titaniwm yn India (mm) | PECYN QTY | PRIS |
|---|---|---|
| 3.0 dia x 0.50 wal x500 | 1 |
£89.00 |
| 3.0 dia x 0.50 wal x500 | 2 |
£148.00 |
| 3.0 dia x 0.50 wal x500 | 3 |
£200.00 |
| 3.0 dia x 0.50 wal x500 | 4 |
£245.00 |
| 3.0 dia x 0.50 wal x500 | 5 |
£284.00 |
| 3.0 dia x 0.50 wal x2000 | 1 |
£180.00 |
| 3.0 dia x 0.50 wal x2000 | 3 |
£452.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x500 | 1 |
£80.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x500 | 2 |
£124.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x500 | 3 |
£164.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x500 | 4 |
£200.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x500 | 5 |
£230.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x1000 | 1 |
£101.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x1000 | 3 |
£255.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x1000 | 5 |
£380.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x2000 | 1 |
£155.00 |
| 1/4"(13.72) NBxSch10/10s(1.65) wal x2000 | 3 |
£385.00 |
Cynhyrchion a ddarperir gan GNEE
| Prif Gynnyrch | Graddau Cyffredin (ASTM) | Manylebau Safonol | Triniaeth Arwyneb Cyffredin |
|---|---|---|---|
| Tiwb Titaniwm (Di-dor a Weldiedig) |
Gr1, Gr2, Gr3, Gr7, Gr9, Gr12 | OD:3mm - 150 mm Trwch Wal:0.5mm - 10 mm Hyd:Hyd at 6000 mm (addasadwy) Safonau: ASTM B337, ASTM B338 |
• Wedi'i sgleinio (Drych / Satin) • piclo • Annealed • Sandblasted |
| Dalen/Plât Titaniwm (Rholio Oer / Rholio Poeth) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Trwch:0.1mm - 50 mm Lled:500mm - 1500 mm Hyd:1000mm - 3000 mm Safonau: ASTM B265 |
• Wedi'i sgleinio (Rhif 4, BA, Drych) • piclo • Annealed • Sandblasted • Wedi'i frwsio |
| Gwifren Titaniwm | Gr1, Gr2, Gr5, Gr7 | Diamedr:0.1mm - 6.0 mm Ffurflen:Coil, Hyd Syth Safonau: ASTM B863, F67, F136 |
• Annealed & piclo • Disglair (Glân) • Oxidized |
| Bar / Gwialen Titaniwm (Crwn, Hecs, Sgwâr) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Diamedr (Rownd):3mm - 200 mm Maint Hecs/Sgwâr:4mm - 100 mm Hyd:1000mm - 3000 mm (neu dorri-i-maint) Safonau: ASTM B348 |
• Wedi troi / Peeled • Wedi'i sgleinio (Ganolfan Ground) • Annealed • Ocsid Du |
| Ffoil Titaniwm | Gr1, Gr2,Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Trwch:0.03mm - 0.1 mm Lled:50mm - 500 mm Safonau: ASTM B265 |
• Bright Annealed (BA) • Rholio Oer |
| Rhannau Peiriannu CNC Titaniwm | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Gallu:Cydrannau personol yn seiliedig ar luniadau cwsmeriaid. Prosesau:Melino, Troi, Drilio, Tapio, ac ati. |
• Fel-Peiriannu • Talu • Wedi'i sgleinio / Tymbl • Anodizing (Lliw, Du) • Sandblasted • Passivation |
