Gr12 aloi titaniwm Rholio poeth a rholio oer Taflen sgleinio
Oct 22, 2025
Gall GNEE ddarparu'r ffurflen
Disgrifiad Cynnyrch
Enw:Plât Titaniwm / Taflen Titaniwm / Bloc Titaniwm
Dwysedd:4.51g/cm3
Safonol: ASTM B265, ASME SB265, JIS H4600, GB / T 3621, AMS4911, AMS4919, ASTM F67, ASTM F136
Gradd:Titaniwm Gr1 (3.7025), Gr2 (3.7035), Gr7 (3.7235), Gr12 (3.7105), Nickel UNS N02200 (2.4066), UNS N02201 (2.4068) Titaniwm Gr5, P270H, TP270C, TP340H, TP340C, TP480H, TP480C, ac ati.
Arwyneb: Bright, Polished, Pickling, Glanhau asid, sgwrio â thywod
Dulliau gweithgynhyrchu:Rholio poeth a rholio oer
Tymheredd anelio:700 ~ 785 gradd
Meintiau:
T (0.1mm - 2.0mm) * W (1250mm) * L (3000mm ar y mwyaf)
T (3.0mm - 5.0mm) * W (1500mm) * L (7000mm ar y mwyaf)
T (6.0mm - 60mm) * W (2500mm ar y mwyaf) * L (7000mm ar y mwyaf)
Cais:
Petrolewm, Meteleg, Cemegol, Fferylliaeth, Peirianneg Forol, Car Rasio, Beic Modur, Beic, Cwch Hwylio, Gwersylla Awyr Agored a Chwaraeon, Offer. Diwydiant meddygol, awyrofod, hedfan gofod, awyren, milwrol, ac ati.
Nodwedd:
Dwysedd 1.Low a Chryfder Uchel
2.Excellent Corydiad Resistance
Gwrthwynebiad 3.Good i effaith gwres
Priodweddau mecanyddol 4.Good
Modwlws 5.High o elastigedd
6. Yn ddiniwed ac yn gyfeillgar i'r amgylchedd
7.Excellent Gan gadw i eiddo cryogenig
8.Anmagnetig ac An-wenwynig
Priodweddau thermol 9.Good
Cyfansoddiad cemegol
|
|
N |
C |
H |
Fe |
O |
Al |
V |
Pd |
Mo |
Ni |
|
|
Gr 1 |
0.03 |
0.08 |
0.015 |
0.20 |
0.18 |
/ |
/ |
/ |
/ |
/ |
|
|
Gr 2 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
/ |
/ |
/ |
|
|
Gr 3 |
0.05 |
0.08 |
0.015 |
0.30 |
0.35 |
/ |
/ |
/ |
/ |
/ |
|
|
Gr 5 |
0.05 |
0.08 |
0.015 |
0.40 |
0.20 |
5.5~6.75 |
3.5~4.5 |
/ |
/ |
/ |
|
|
Gr 7 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
0.12~0.25 |
/ |
/ |
|
|
Gr 9 |
0.03 |
0.08 |
0.015 |
0.25 |
0.15 |
2.5~3.5 |
2.0~3.0 |
/ |
/ |
/ |
|
|
Gr12 |
0.03 |
0.08 |
0.015 |
0.30 |
0.25 |
/ |
/ |
/ |
0.2~0.4 |
0.6~0.9 |
|
Cynhyrchion a ddarperir gan GNEE
| Prif Gynnyrch | Graddau Cyffredin (ASTM) | Manylebau Safonol | Triniaeth Arwyneb Cyffredin |
|---|---|---|---|
| Tiwb Titaniwm (Di-dor a Weldiedig) |
Gr1, Gr2, Gr3, Gr7, Gr9, Gr12 | OD:3mm - 150 mm Trwch wal:0.5mm - 10 mm Hyd:Hyd at 6000 mm (addasadwy) Safonau: ASTM B337, ASTM B338 |
• Wedi'i sgleinio (Drych / Satin) • piclo • Annealed • Sandblasted |
| Dalen/Plât Titaniwm (Rholio Oer / Rholio Poeth) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Trwch:0.1mm - 50 mm Lled:500mm - 1500 mm Hyd:1000mm - 3000 mm Safonau: ASTM B265 |
• Wedi'i sgleinio (Rhif 4, BA, Drych) • piclo • Annealed • Sandblasted • Wedi'i frwsio |
| Gwifren Titaniwm | Gr1, Gr2, Gr5, Gr7 | Diamedr:0.1mm - 6.0 mm Ffurflen:Coil, Hyd Syth Safonau: ASTM B863, F67, F136 |
• Annealed & piclo • Disglair (Glân) • Oxidized |
| Bar / Gwialen Titaniwm (Crwn, Hecs, Sgwâr) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Diamedr (Rownd):3mm - 200 mm Maint Hecs/Sgwâr:4mm - 100 mm Hyd:1000mm - 3000 mm (neu dorri-i-maint) Safonau: ASTM B348 |
• Wedi troi / Peeled • Wedi'i sgleinio (Ganolfan Ground) • Annealed • Ocsid Du |
| Ffoil Titaniwm | Gr1, Gr2,Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Trwch:0.03mm - 0.1 mm Lled:50mm - 500 mm Safonau: ASTM B265 |
• Bright Annealed (BA) • Rholio Oer |
| Rhannau Peiriannu CNC Titaniwm | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Gallu:Cydrannau personol yn seiliedig ar luniadau cwsmeriaid. Prosesau:Melino, Troi, Drilio, Tapio, ac ati. |
• Fel-Wedi'i Peiriannu • Talu • Wedi'i sgleinio / Tymbl • Anodizing (Lliw, Du) • Sandblasted • Passivation |
