ASTM B265 Gr12 Titaniwm electrodau Plât caboledig
Oct 21, 2025
Gall GNEE ddarparu'r ffurflen
Gr12 TitaniwmBar
Cyfansoddiad
| Elfen | Isafswm (pwysau %) | Uchafswm (pwysau %) | Nodweddiadol (pwysau %) |
|---|---|---|---|
| Ni | 0.6 | 0.9 | |
| Mo | 0.2 | 0.4 | |
| Fe | 0.30 | ||
| O | 0.25 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Cydbwysedd |
Dwysedd
| lb/mewn3 | g/cm3 |
|---|---|
| 0.163 | 4.51 |
Cryfder Tynnol
| ksi | MPa |
|---|---|
| 70 mun | 483 mun |
Cryfder Cynnyrch
| ksi | MPa |
|---|---|
| 50 mun | 345 mun |
Gr12 TitaniwmPlât
Cyfansoddiad
| Elfen | Isafswm (pwysau %) | Uchafswm (pwysau %) | Nodweddiadol (pwysau %) |
|---|---|---|---|
| Ni | 0.6 | 0.9 | |
| Mo | 0.2 | 0.4 | |
| Fe | 0.30 | ||
| O | 0.25 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Cydbwysedd |
Dwysedd
| lb/mewn3 | g/cm3 |
|---|---|
| 0.163 | 4.51 |
Cryfder Tynnol
| ksi | MPa |
|---|---|
| 70 mun | 483 mun |
Cryfder Cynnyrch
| ksi | MPa |
|---|---|
| 50 mun | 345 mun |
Elongation
| 18% mun |
Manylebau
ASTM B265, ASME SB-265
Gr12 TitaniwmTaflen
Cyfansoddiad
| Elfen | Isafswm (pwysau %) | Uchafswm (pwysau %) | Nodweddiadol (pwysau %) |
|---|---|---|---|
| Ni | 0.6 | 0.9 | |
| Mo | 0.2 | 0.4 | |
| Fe | 0.30 | ||
| O | 0.25 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Cydbwysedd |
Dwysedd
| lb/mewn3 | g/cm3 |
|---|---|
| 0.163 | 4.51 |
Cryfder Tynnol
| ksi | MPa |
|---|---|
| 70 mun | 483 mun |
Cryfder Cynnyrch
| ksi | MPa |
|---|---|
| 50 mun | 345 mun |
Elongation
| 18% mun |
Manylebau
ASTM B265, ASME SB-265
Gr12 TitaniwmLlain
Cyfansoddiad
| Elfen | Isafswm (pwysau %) | Uchafswm (pwysau %) | Nodweddiadol (pwysau %) |
|---|---|---|---|
| Ni | 0.6 | 0.9 | |
| Mo | 0.2 | 0.4 | |
| Fe | 0.30 | ||
| O | 0.25 | ||
| C | 0.08 | ||
| N | 0.03 | ||
| H | 0.015 | ||
| Ti | Cydbwysedd |
Dwysedd
| lb/mewn3 | g/cm3 |
|---|---|
| 0.163 | 4.51 |
Cryfder Tynnol
| ksi | MPa |
|---|---|
| 70 mun | 483 mun |
Cryfder Cynnyrch
| ksi | MPa |
|---|---|
| 50 mun | 345 mun |
Elongation
| 18% mun |
Manylebau
ASTM B265, ASME SB-265
Cynhyrchion a ddarperir gan GNEE
| Prif Gynnyrch | Graddau Cyffredin (ASTM) | Manylebau Safonol | Triniaeth Arwyneb Cyffredin |
|---|---|---|---|
| Tiwb Titaniwm (Di-dor a Weldiedig) |
Gr1, Gr2, Gr3, Gr7, Gr9, Gr12 | OD:3mm - 150 mm Trwch wal:0.5mm - 10 mm Hyd:Hyd at 6000 mm (addasadwy) Safonau: ASTM B337, ASTM B338 |
• Wedi'i sgleinio (Drych / Satin) • piclo • Annealed • Sandblasted |
| Dalen/Plât Titaniwm (Rholio Oer / Rholio Poeth) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Trwch:0.1mm - 50 mm Lled:500mm - 1500 mm Hyd:1000mm - 3000 mm Safonau: ASTM B265 |
• Wedi'i sgleinio (Rhif 4, BA, Drych) • piclo • Annealed • Sandblasted • Wedi'i frwsio |
| Gwifren Titaniwm | Gr1, Gr2, Gr5, Gr7 | Diamedr:0.1mm - 6.0 mm Ffurflen:Coil, Hyd Syth Safonau: ASTM B863, F67, F136 |
• Annealed & piclo • Disglair (Glân) • Oxidized |
| Bar / Gwialen Titaniwm (Crwn, Hecs, Sgwâr) |
Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Diamedr (Rownd):3mm - 200 mm Maint Hecs/Sgwâr:4mm - 100 mm Hyd:1000mm - 3000 mm (neu dorri-i-maint) Safonau: ASTM B348 |
• Wedi troi / Peeled • Wedi'i sgleinio (Ganolfan Ground) • Annealed • Ocsid Du |
| Ffoil Titaniwm | Gr1, Gr2,Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Trwch:0.03mm - 0.1 mm Lled:50mm - 500 mm Safonau: ASTM B265 |
• Bright Annealed (BA) • Rholio Oer |
| Rhannau Peiriannu CNC Titaniwm | Gr1, Gr2, Gr5 (Ti-6Al-4V), Gr7, Gr9, Gr12 | Gallu:Cydrannau personol yn seiliedig ar luniadau cwsmeriaid. Prosesau:Melino, Troi, Drilio, Tapio, ac ati. |
• Fel-Wedi'i Peiriannu • Talu • Wedi'i sgleinio / Tymbl • Anodizing (Lliw, Du) • Sandblasted • Passivation |
